Conair FC-33 Guida Utente Scaricare il pdf (Pagina 15)

UGG003/0398 CF Series Granulators

OPERATION/MAINTENANCE 11

Monthly inspection

Check that the V-belts are undamaged.

Check the V-belt tension every 6 months, see chapter 7.3 ÒTransmissionÓ.

6.3 Cleaning

Clean at colour change, monthly or at least once/300 hours.

Be careful when the hopper have been opened. The knives are now accessi-

ble, they are sharp, and can cause personal injury.

1. Check that the hopper is empty, then stop the granulator.

Switch ÒOffÓ both the main switch and the switch on

the granulator.

2. Clean the outside of the hopper.

3. Undo the star knobs on the hopper.

4. Undo the tip chatch.

NOTE! The hopper is counterbalanced with one alter-

native two gas springs, but hold the hopper at the same

time, so that it does not fall down out of control.

5. Open/fold the hopper backwards.

6. Clean the hopper«s opening.

7. Lift out and clean the inner and

outer flaps.

8. Open the door.

9. Undo and pull out the extraction

pipe from the left-hand side of the

granulator.

Alt. U model, undo the quick coupling

on the outlet pipe stub.

10. Remove the granule bin.

11. Undo the star knobs for the screen box.

NOTE! Hold the screen box at the same time,

so that it does not fall down out of control.

12. Fold the screen box down.

13. Undo and clean the screen.

14. Undo and remove the blue screws (A)

for the bearing cleaning holes.

15. Blow through the holes with compressed

air and rotate the cutter at least one turn.

NOTE! When the cutter is rotated

manually, do this with great care.

The knives are sharp and can cause

personal injury.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 57 58

Nessun commento

Conair FC-33 Guida Utente Pagina 15